Jianghuai Shuailing refueling car comparison Jianghuai new Junling refueling car

\

Jianghuai Xinjunling refueling car announcement model Chusheng CSC5071GJYJH type fuel truck, chassis model HFC1071P82K5C2Z, 3308 wheelbase, JAC HFC4DA1-2C engine, 120 horsepower, 700R16 steel wire tire, Junling new cab, air brake, with front plate, ABS , moving, speed limit device. Total mass (Kg) 7360 rated load mass (Kg) 3380 curb weight (Kg) 3850, outer dimensions (mm) 5990 × 1950 × 2500, tank volume 6 cubic meters; tank dimensions (length × long axis × short axis (mm): 1 The side of the tanker is mounted on the left or right side of the frame: 4000×1700×1100, and the 2 tanker is installed in the front of the tank: 4000×1750×1250 (the length of the tanker is 800). Oil plant model and manufacturer: BL1111Z/Zhuhai Beiling Fuel Equipment Co., Ltd. Zhongshan Branch, HS1812B/Tokent Hengshan Technology (Guangzhou) Co., Ltd., SKES-1112/Shanghai Bolai Machinery Co., Ltd., SK20QF-111A, SK20QF- 222A/Zhengzhou Sanjin Petroleum Equipment Manufacturing Co., Ltd., CS20D1110F/Zhengxing Technology Co., Ltd., JSK-70B1121CZ/Sheng Enjia Lijia (Beijing) Petrochemical Equipment Co., Ltd.

\

【The main technical parameters】

Product trademark Chusheng

Announcement Lot 275

Product nameCSC5071GJYJH type fuel truck

Product No. ZLLF74WP02C

Total mass (Kg) 7360

Tank volume (m3) 5

Rated load mass (Kg) 3380

Dimensions (mm) 5990×1950×2500

Curing quality (Kg) 3850

Cargo size (mm) × ×

Rated passenger (person)

Quasi-trailer total mass (Kg)

Number of passengers in the cab (person) 2

Load mass utilization factor

Approach angle / departure angle (°) 23/17

Front overhang / rear overhang (mm) 1105/1577

Number of axes 2

Wheelbase (mm) 3308

Axle load (Kg) 2360/5000

Maximum speed (Km/h) 80

Other 1, transport medium: gasoline, category number: 3, density: 700 kg / cubic meter; tank effective volume 5 cubic meters; tank dimensions (length × long axis × short axis) (mm): 1 tanker Side mounted on the left or right side of the frame: 4000 × 1700 × 1100, 2 tanker installed in the front of the tank: 4000 × 1750 × 1250 (the tank length 800). 2, the side protection is cold-formed steel / Q235, bolted. The rear protection is made of cold-formed steel/Q235, welded, with a section height of 300mm, a section width of 50mm, and a lower edge of 500mm from the ground. Refueling device model and manufacturer: BL1111Z/Zhuhai Beiling Fueling Equipment Co., Ltd. Zhongshan Branch, HS1812B/Tokeng Hengshan Technology (Guangzhou) Co., Ltd., SKES-1112/Shanghai Bolai Machinery Co., Ltd., SK20QF-111A, SK20QF- 222A/Zhengzhou Sanjin Petroleum Equipment Manufacturing Co., Ltd., CS20D1110F/Zhengxing Technology Co., Ltd., JSK-70B1121CZ/Sheng Enjia Lijia (Beijing) Petrochemical Equipment Co., Ltd. 3, optional semi-cab, optional ladder at the rear; only the radial tire, the speed limit device and the chassis of the front disc brake; the car should be equipped with a satellite positioning function of the tachograph. ABS model/manufacturer: ABS-E 4S/4M/ WABCO Automotive Control Systems (China) Co., Ltd.

\

Jianghuai Shuailing refueling car chassis configuration: handsome bell new luxury cab, Jianghuai power HFC4DA1-2C national four engine 120 horsepower, wheelbase 3360, 5T28 gearbox, 700R16 tires, moving, air conditioning, front disc drum, ABS, driving Recorder and exhaust pipe front. Transport medium: gasoline, category number: 3, density: 700 kg / cubic meter; tank effective volume 5.5 cubic meters; tank dimensions (length × long axis × short axis) (mm): 1 tanker side loading: 4000 × 1750 × 1100, 2 tanker installed in the front of the tank: 4000 × 1800 × 1250 (the tank length 800). The maximum volume of the tank is 6.39 square meters.

\

【The main technical parameters】

Product trademark Chusheng

Announcement batch 269

Product nameCSC5073GJYJH type fuel truck

Product No. ZL2NF4R402E

Total mass (Kg) 6995

Tank volume (m3) 5.5

Rated load mass (Kg) 3700

Dimensions (mm) 6050×1950×2500

Curing quality (Kg) 3165

Cargo size (mm) × ×

Rated passenger (person)

Quasi-trailer total mass (Kg)

Number of passengers in the cab (person) 2

Load mass utilization factor

Approach angle / departure angle (°) 24/19

Front overhang / rear overhang (mm) 1105/1585

Number of axes 2

Wheelbase (mm) 3360

Axle load (Kg) 2520/4475

Maximum speed (Km/h) 80

Others 1, transportation medium: gasoline, category number: 3, density: 700 kg / cubic meter; tank effective volume 5.5 cubic meters; tank dimensions (length × long axis × short axis) (mm): 1 tanker Side loading: 4000 × 1750 × 1100, 2 tanker installed in the front of the tank: 4000 × 1800 × 1250 (the tank length 800). 2. The side protection is cold-formed steel/Q235 and bolted. The rear protection is made of cold-formed steel/Q235, welded, with a section height of 350mm, a section width of 50mm, and a lower edge of 550mm from the ground. Tanker model and manufacturer: HS18012B/Tokken Hengshan Technology (Guangzhou) Co., Ltd., SKES-1112/Shanghai Bolai Machinery Co., Ltd., SK20QF-111A, SK20QF-222A/Zhengzhou Sanjin Petroleum Equipment Manufacturing Co., Ltd., C220D1110F/ Zhengxing Technology Co., Ltd. 3. Only use the radial tire, the speed limit device and the chassis of the front disc brake; the vehicle should be equipped with a tachograph with satellite positioning function. ABS model / manufacturer: CM4YL / Guangzhou Kemi Automobile Brake Technology Development Co., Ltd. (This article comes from Xiagong Chusheng)

Diesel High Pressure Washer

Diesel Pressure Washer,Diesel High Pressure Washer,Industrial Diesel Pressure Washer,Industrial Diesel High Pressure Washer

Taizhou Chendi Electromechanical Co., Ltd. , https://www.chinachendi.com

This entry was posted in on